Dell PowerEdge C5220 Hardware Owner's Manual - Page 61
Installing a 2.5-inch Hard Drive, Connect the hard drive to the hard-drive board in the sled.
View all Dell PowerEdge C5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Installing a 2.5-inch Hard Drive 1 Align the 2.5-inch hard-drive bracket on the new hard drive then replace the four screws. NOTE: The correct orientation of the bracket with the arrow mark pointing towards the hard drive connector. 2 Connect the hard drive to the hard-drive board in the sled. 2.5" HDD 2.5" HDD 2.5" HDD 2.5" HDD HDD0 HDD1 HDD2 HDD3 3 Replace the sled hard-drive bracket screws underneath the sled. Installing System Components 61
Installing System Components
61
Installing a 2.5-inch Hard Drive
1
Align the 2.5-inch hard-drive bracket on the new hard drive then replace
the four screws.
2
Connect the hard drive to the hard-drive board in the sled.
3
Replace the sled hard-drive bracket screws underneath the sled.
NOTE:
The correct orientation of the bracket with the arrow mark pointing towards
the
hard drive
connector.
HDD0
2.5” HDD
HDD1
2.5” HDD
HDD2
2.5” HDD
HDD3
2.5” HDD