Dell PowerEdge C5220 Hardware Owner's Manual - Page 75
Installing the SAS Mezzanine Card, Securing a Mezzanine Assembly
View all Dell PowerEdge C5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 3-8. Securing a Mezzanine Assembly 8 7 8 Secure the assembly to the sled assembly with the provided screw. Installing the SAS Mezzanine Card Prior to installing a mezzanine card, you must first remove the sled board from the chassis, see "Removing a Sled" on page 52. 1 Remove the mezzanine card from its static-proof packing. 2 With the PCIe connector facing up, attach the 2.5-inch SAS cable to the SAS mezzanine card. 3 Place the mezzanine card in the mezzanine bracket. 4 Secure the card on the bracket with the provided screws. 5 Insert the linking board into the mezzanine card as shown in the following image. 6 Secure the linking board to the bracket with the provided screw. Installing System Components 75
Installing System Components
75
Figure 3-8.
Securing a Mezzanine Assembly
8
Secure the assembly to the sled assembly with the provided screw.
Installing the SAS Mezzanine Card
Prior to installing a mezzanine card, you must first remove the sled board
from the chassis, see "Removing a Sled" on page 52.
1
Remove the mezzanine card from its static-proof packing.
2
With the PCIe connector facing up, attach the 2.5-inch SAS cable to the
SAS mezzanine card.
3
Place the mezzanine card in the mezzanine bracket.
4
Secure the card on the bracket with the provided screws.
5
Insert the linking board into the mezzanine card as shown in the following
image.
6
Secure the linking board to the bracket with the provided screw.
7
8