Dell PowerEdge C8000 Dell PowerEdge C8220X Hardware Owner's Manual - Page 111

Table 2-1. D4 Token Table (continued) Token 02CA 02CE 02CF 401A 401B 401C 401D 4022 4026 Setup Option Description QPI Bandwidth Sets to I/O for I/O-intensive applications. Priority DCU IP Prefetcher Enables the DCU IP Prefetcher. (default) DCU IP Prefetcher Disables the DCU IP Prefetcher. Terminal Type The BIOS console redirection, if enabled, operates in VT100 emulation model. See tokens BFh, C0h, and D7h. Terminal Type The BIOS console redirection, if enabled, operates in ANSI emulation model. See also tokens BFh, C0h, and D7h. Redirection After The BIOS console redirection, if enabled, continues to BIOS POST operate after the OS boot hand-off. Redirection After The BIOS console redirection, if enabled, operates BIOS POST during the BIOS boot only and is disabled prior to OS boot hand-off. See also tokens BFh, C0h, D7h, 401Ah and 401Bh. 1st Boot Device Whenever the BIOS boots the system, the first PXEcapable device is inserted as the first device in the boot sequence. Enabling this feature causes the BIOS operation to occur on the next and all subsequent boots and causes a change in the system's defined boot sequence. The BIOS chooses the first PXEcapable device as the system's onboard network controller, if present and enabled, or the first bootable network device found in the system's standard PCI search order. Manufacturing Mode Enables the manufacturing mode to bypass POST tasks/memory tests and F1/F2 prompts on specific error messages. Used by manufacturers only and is not for general use. Using the System Setup Program 111