Dell PowerEdge C8000 Dell PowerEdge C8220X Hardware Owner's Manual - Page 241

Figure 3-76. Removing and Installing the SD Card Reader Support Bracket 1 screws (2) 2 SD card reader support bracket Installing the SD Card Reader Support Bracket CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product. 1 Align the SD card reader support bracket with the screw holes on the sled tray. See Figure 3-76. 2 Replace the two screws securing the SD card reader support bracket. See Figure 3-76. 3 Replace the SD card reader. See "Installing the SD Card Reader" on page 239. 4 Replace the mezzanine card. See "Installing the SAS Mezzanine Card" on page 229, "Installing the Infiniband Mezzanine Card" on page 232, or "Installing the 10 GbE Mezzanine Card" on page 236. 5 Close the sled. See "Installing the Front and Back Sled Covers" on page 165 or "Installing the Sled Cover" on page 168. 6 Replace the sled. See "Installing a Sled" on page 142. Installing System Components 241