Dell PowerEdge C8000 Dell PowerEdge C8220X Hardware Owner's Manual - Page 61
Remote Access Configuration, BMC LAN Configuration
View all Dell PowerEdge C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5 In the Server screen, select Remote Access Configuration and press . 6 In the Remote Access Configuration screen, verify the following settings: • Remote Access: Enabled • Serial port number: COM2 • Serial Port Mode: 115200 8,n,1 • Flow Control: None • Redirection After BIOS POST: Always • Terminal Type: ANSI See "Remote Access Configuration" on page 94 for details. Make sure the last four options syncs with the host and client. 7 In the Server screen, select BMC LAN Configuration and press . 8 In the BMC LAN Configuration screen, verify the following settings: • BMC LAN Port Configuration: Shared-NIC • BMC NIC IP Source: DHCP or Static (Use DHCP if your network servers are using automatic assignment of IP addresses) • IP Address: 192.168.001.003 • Subnet Mask: 255.255.255.000 • Gateway Address: 000.000.000.000 See "Set BMC LAN Configuration" on page 93 for details. Make sure the host and client are on the same network 9 Press to return to the System Setup screen. Press again, and a message prompts you to save the changes. Using the System Setup Program 61