Dell PowerEdge M605 Fabric OS Message Reference - Page 379

42 FW-1136 FW-1136 Message , [FW-1136], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric logins has changed from a value outside of the acceptable range to a value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1137 Message , [FW-1137], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed. SFP state changes occur when the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1138 Message , [FW-1138], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has fallen below the low boundary. SFP state changes occur when the SFP is inserted or removed. A low number of SFP state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1139 Message , [FW-1139], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Fabric OS Message Reference 303 53-1001767-01