Dell PowerEdge M605 Fabric OS Message Reference - Page 432

42 FW-1535 FW-1535 Message , [FW-1535], ,, INFO, , Fabric Watch has stopped portfencing feature for loss area in class since FOS6.3. Disabling port fencing feature for this. Probable Cause Indicates that in previous versions portfencing is configured for Link/Sync loss, but after upgrading to new version, in which portfencing is not suppoted, resets the above bit. Recommended No action is required. You are informed that PF bit is reset. Action Severity INFO FW-3010 Message , [FW-3010], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the circuit utilization has changed. Recommended Respond to this message as it is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-3011 Message , [FW-3011], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the circuit utilization is below threshold. Recommended No action is required. Action Severity INFO FW-3012 Message Probable Cause , [FW-3012], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Indicates that the circuit utilization is above threshold. 356 Fabric OS Message Reference 53-1001767-01