Dell PowerEdge M605 Fabric OS Message Reference - Page 615
SEC-1171, Message, Probable Cause, Recommended, Action, pkiShow, pkiCreate, licenseAdd, Severity
View all Dell PowerEdge M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 615 highlights
90 SEC-1171 SEC-1171 Message , [SEC-1171], ,, ERROR, , Disabled secure mode due to invalid security object. Probable Cause Indicates the switch is segmented, and secure mode is disabled on the switch because there was no license present or no public key infrastructure (PKI) objects. Recommended Action Run the pkiShow command to determine whether all PKI objects exist. If they do not exist, run the pkiCreate command to create them for the switch. Run the licenseAdd command to install the required license key. Refer to your switch supplier to obtain a license if you do not have one. Severity ERROR SEC-1172 Message , [SEC-1172], ,, ERROR, , Failed to identify role. Probable Cause Indicates the switch is unable to determine its role (primary FCS or backup FCS) in the secure fabric. Recommended Verify all switches in the fabric are in time synchronization with the primary and that no external Action entity is trying to access the fabric. When verification is complete, retry the operation. Severity ERROR SEC-1173 Message , [SEC-1173], ,, ERROR, , Lost contact with Primary FCS switch. Probable Cause Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the secure fabric. This could be due to the primary FCS being disabled. Recommended If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS. Action Severity ERROR SEC-1174 Message Probable Cause , [SEC-1174], ,, ERROR, , Failed to set password. Indicates the FCS or non-FCS password could not be set. Fabric OS Message Reference 539 53-1001767-01