Dell PowerEdge M605 Fabric OS Message Reference - Page 599

90 SEC-1092 SEC-1092 Message , [SEC-1092], ,, ERROR, , Name not found. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1093 Message , [SEC-1093], ,, ERROR, , New FCS list must have at least one member in common with current FCS list. Probable Cause Indicates the new fabric configuration server (FCS) list does not have a common member with the existing FCS list. Recommended Resubmit the command with at least one member of the new FCS list in common with the current Action FCS list. Severity ERROR SEC-1094 Message , [SEC-1094], ,, ERROR, , Policy member not found. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1095 Message , [SEC-1095], ,, ERROR, , Deleting FCS policy is not allowed. Fabric OS Message Reference 523 53-1001767-01