Dell PowerEdge M605 Fabric OS Message Reference - Page 626
SEC-1306, Probable Cause, Recommended, Action, secFabricShow, Severity, Message, pkiShow, aaaConfig
View all Dell PowerEdge M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 626 highlights
90 SEC-1306 Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity INFO SEC-1306 Message , [SEC-1306], ,, INFO, , Failed to verify certificate with root CA. Probable Cause Indicates the certificate could not be verified with root certificate authority (CA). This could happen if an unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a root CA certificate does not exist on the switch. Recommended Action Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the switch. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access the fabric. Severity INFO SEC-1307 Message , [SEC-1307], ,, INFO, , Got response from server . Probable Cause Indicates that after some servers timed out, the specified remote authentication dial-in user service (RADIUS/LDAP) server responded to a switch request. Recommended If the message appears frequently, move the responding server to the top of the RADIUS/LDAP Action server configuration list using the aaaConfig command. Severity INFO SEC-1308 Message , [SEC-1308], ,, INFO, , All %s servers have failed to respond. Probable Cause Indicates that all servers in the remote authentication dial-in user service (RADIUS) configuration have failed to respond to a switch request within the specified time-out. Recommended Verify the switch has proper network connectivity to the specified remote authentication dial-in user Action service (RADIUS) servers, and the servers are correctly configured. 550 Fabric OS Message Reference 53-1001767-01