Dell PowerEdge M605 Fabric OS Message Reference - Page 752
AG-1037, Probable Cause, Recommended, Action, Severity, Message, switchshow
View all Dell PowerEdge M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 752 highlights
112 AG-1037 Probable Cause Indicates that one of the ports is connected to a Non-Brocade Fabric. Recommended No action is required. Action Severity WARNING AG-1037 Message AUDIT, , [AG-1037], ,, INFO, ,Trunked N_Port () going offline, if switchshow CLI for the connected fabric switch port displays Persistently disabled: Area has been acquired, then check cabling: all trunked ports should be in same ASIC Port Group . Probable Cause Indicates that the cabling is incorrect. Recommended Action If the switchshow command on the connected fabric switch port displays 'Persistently disabled: Area has been acquired', then check the cabling on the AG. All trunked ports in a single trunk should belong to the same ASIC Port Group. Severity INFO 676 Fabric OS Message Reference 53-1001767-01