Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.20.0 - Page 10
chassisaction, chassisgroup
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Table 4. racadm arp (continued) Address HWtype 192.168.0.121 ether HWaddress 90:b1:1c:f4:34:f4 Flags Mask C Iface pub chassisaction Description Synopsis Runs the turn on, turn off, power cycle, or reset operation. racadm chassisaction [-m ] Input Example • -m-Must be one of the following values: ○ chassis-Default state if -m is not specified. ○ switch--Where n =1-6 • -Must be one of the following values: ○ powerdown-Graceful shutdown of the module ○ powerup-Turns on the module ○ powercycle-Graceful restart of the module ○ nongraceshutdown-Nongraceful shutdown of the module ○ reset-Hard reset of the module NOTE: The valid option for is reset. • Perform a reset of switch-2 racadm chassisaction -m switch-2 reset • Perform a non-graceful shutdown of the chassis racadm chassisaction -m chassis nongraceshutdown chassisgroup Description Synopsis Approves or rejects the chassis addition requests. You can also use this command to view the chassis group details. Supported options are: • racadm chassisgroup help add • racadm chassisgroup help view • racadm chassisgroup help admit • racadm chassisgroup help deny racadm chassisgroup Input Examples • -m-IPv4 address of stand-alone chassis • -l-IPv4 address of leader chassis • -g-Name of the chassis group • --pending- Pending requests to join the group • --discovered- Discovered chassis in the wired environment • Executes on a leader, adds a stand-alone chassis to the group: racadm chassisgroup add -m 192.168.0.1 10 RACADM sub command details