Dell PowerEdge MX7000 EMC OpenManage Enterprise Modular Edition Version 1.20.0 - Page 19

A N/A 5 SLOT-5 ON 1 PowerEdge MX740c 6 SLOT-6 ON 1 PowerEdge MX740c 7 SLOT-7 ON 1 PowerEdge MX740c 8 SLOT-8 ON 1 PowerEdge MX740c 227 W 228 W 240 W 622 W getpminfo Description Synopsis Gets power management status information. racadm getpminfo Input racadm getpminfo Example [Real-Time Power Statistics] System Input Power Peak System Power Peak System Power Start Time Peak System Power Timestamp Minimum System Power Minimum System Power Start Time Minimum System Power Timestamp System Idle Power System Potential Power System Input Current Reading = 616 W (2101 BTU/h) = 628 W (2142 BTU/h) = Not Applicable = 11:37:36 08/08/2018 = 606 W (2067 BTU/h) = Not Applicable = 10:16:08 08/06/2018 = Not Applicable = Not Applicable = Not Applicable [Real-Time Energy Statistics] System Energy Consumption System Energy Consumption Start Time System Energy Consumption Timestamp = 204 kWh = Not Applicable = 05:47:05 08/20/2018 [System Power Status] Chassis Power State Overall Power Health Redundancy = ON = Not OK = No [System Power Policy Configuration] System Input Power Cap Redundancy Policy Dynamic PSU Engagement Enabled = Disabled = None = Not Applicable [Power Budgeting] System Input Max Power Capacity = 11571 W Input Redundancy Reserve = Not Applicable Input Power Allocated to Servers = Not Applicable Input Power Allocated to Chassis Infrastructure = Not Applicable Total Input Power Available for Allocation = 2384 W (8134 BTU/h) Standby Input Power Capacity = Not Applicable getsensorinfo Description Displays system sensors. RACADM sub command details 19