Dell PowerEdge SDS 100 Dell PowerEdge R720 and R720xd Owner's Manual - Page 156

>. Check PSU

Page 156 highlights

Error Code PST0128 PST0129 PSU0001 PSU0002 PSU0003 156 Message Information LCD Message Details Action Drive removed from disk drive bay . Check drive. The controller detected that the drive was removed. Verify drive installation. Re-seat the failed drive. If the issue persists, see Getting Help. Message LCD Message Details Action No memory is detected. No memory is detected. Inspect memory devices. System BIOS was unable to detect memory in the system. Re-seat the memory modules. If the issue persists, see Getting Help. Message LCD Message Details Action Memory is detected, but is not configurable. Memory is detected, but is not configurable. Check memory devices. System BIOS detected memory, but was unable to configure the memory for system operation. Compare system memory installation to supported system memory configurations. Message LCD Message Action Power supply failed. PSU failed. Check PSU. Remove and reinstall the power supply. If the issue persists, see Getting Help. Message LCD Message Details Action A predictive failure detected on power supply . Predictive failure on PSU . Check PSU. System performance and power redundancy may be degraded or lost. Remove and reinstall the power supply at the next service window. If the issue persists, see Getting Help. Message LCD Message Details Action The power input for power supply is lost. Power input for PSU is lost. Check PSU cables. The power supply is installed correctly but an input source is not connected or is not functional. Verify the input source is attached to the power supply. Verify the input power is within the operating requirements for the power supply.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165

Error Code
Message Information
LCD Message
Drive <
number
> removed from disk drive bay <
bay
>. Check drive.
Details
The controller detected that the drive was removed.
Action
Verify drive installation. Re-seat the failed drive. If the issue persists,
see
Getting Help
.
PST0128
Message
No memory is detected.
LCD Message
No memory is detected. Inspect memory devices.
Details
System BIOS was unable to detect memory in the system.
Action
Re-seat the memory modules. If the issue persists, see
Getting Help
.
PST0129
Message
Memory is detected, but is not configurable.
LCD Message
Memory is detected, but is not configurable. Check memory devices.
Details
System BIOS detected memory, but was unable to configure the
memory for system operation.
Action
Compare system memory installation to supported system memory
configurations.
PSU0001
Message
Power supply <
number
> failed.
LCD Message
PSU <
number
> failed. Check PSU.
Action
Remove and reinstall the power supply. If the issue persists, see
Getting Help
.
PSU0002
Message
A predictive failure detected on power supply <
number
>.
LCD Message
Predictive failure on PSU <
number
>. Check PSU.
Details
System performance and power redundancy may be degraded or
lost.
Action
Remove and reinstall the power supply at the next service window. If
the issue persists, see
Getting Help
.
PSU0003
Message
The power input for power supply <
number
> is lost.
LCD Message
Power input for PSU <
number
> is lost. Check PSU cables.
Details
The power supply is installed correctly but an input source is not
connected or is not functional.
Action
Verify the input source is attached to the power supply. Verify the
input power is within the operating requirements for the power
supply.
156