Dell PowerEdge SDS 100 Dell PowerEdge R720 and R720xd Owner's Manual - Page 161
appear if the user disabled event logging., Backup and clear log.
View all Dell PowerEdge SDS 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Error Code SEC0031 SEC0033 SEL0006 SEL0008 SEL0012 SEL1204 Message Information Message LCD Message Details Action The chassis is open while the power is on. Intrusion detected. Check chassis cover. The chassis is open. System performance may be degraded, and security may be compromised. Close the chassis. Check system logs. Message LCD Message Details Action The chassis is open while the power is off. Intrusion detected. Check chassis cover. The chassis was opened while the power was off. System security may have been compromised. Close the chassis and verify hardware inventory. Check system logs. Message Details Action All event logging is disabled. This message is displayed when all event logging has been disabled by the user. If unintended, re-enable logging. Message Details Action Log is full. When the event log is full, additional events are not written to the log. Older events may be overwritten and lost. This message may also appear if the user disabled event logging. Backup and clear log. Message Details Action Could not create or initialize the system event log. If the system event log fails to initialize, platform status and failure events are not captured. Some management software do not report platform exceptions. Reboot the management controller or iDRAC. Cycle system input power. If problem persists call support. Message LCD Message Details An unknown system hardware failure detected. Unknown system hardware failure. If the system event log failed to initialize, platform status and failure events are not captured. Some management software do not report platform exceptions. 161