Dell PowerEdge T40 EMC Technical Specifications Guide - Page 11

Optical drives The PowerEdge T40 system supports the following optical drives. Table 8. Supported optical drive type Supported drive type Slim 9.5 mm SATA DVD+/-RW drive Supported number of drives One NOTE: External optical drives can be connected through the USB ports. Ports and connectors specifications USB ports specifications The PowerEdge T40 system supports the USB ports mentioned below: Table 9. PowerEdge T40 system USB specifications Front Panel • Two USB 2.0-compliant Type-A ports • • One USB 3.0 Type-A compliant port • • One USB 3.1-compliant Type-C port Rear Panel Four USB 3.0 Type-A compliant ports Two USB 2.0 Type-A compliant ports NIC port specifications The PowerEdge T40 system supports a Network Interface Controller (NIC) port on the back panel, which is available in 10/100/1000 Mbps NIC configurations. Serial connector specifications The PowerEdge T40 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. DisplayPort specifications The PowerEdge T40 system supports two DisplayPorts located on the back panel of the system. Video specifications The PowerEdge T40 system supports: • Intel UHD Graphics P630 for Intel Xeon E processor • Intel UHD Graphics 630 for Intel Core i3 processor • Intel UHD Graphics 610 for Intel Pentium Gold processor Environmental specifications NOTE: For additional information about environmental certifications, refer to the Product Environmental Datasheet located with the Manuals & Documents on www.dell.com/support/home. Technical specifications 11