Dell PowerVault MD3200 CLI Guide - Page 180

Parameter Parameter diskGroup Description Number of the disk group to be set to the optimal state. You must put brackets ([ ]) around the disk group number. Revive Physical Disk This command forces the specified physical disk to the optimal state. CAUTION: Correct use of this command depends on the data configuration on all physical disks in the disk group. Never attempt to revive a physical disk unless supervised by a Technical Support representative. Syntax revive physicalDisk [enclosureID,slotID] Parameter Parameter physicalDisk Description Identifies the enclosure and slot where, the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and the slot ID value. Save Enclosure Log Data This command saves the enclosure log sense data to a file. Log sense data is maintained by the environmental cards for each enclosure. Not all of the environmental cards contain log sense data. Syntax save allEnclosures logFile="filename" Parameter Parameter logFile Description Name of the file to which to save the log sense data. You must put quotation marks (" ") around the file name. 180 Script Commands