Dell PowerVault MD3200 CLI Guide - Page 191

Parameters Parameter physicalDisk or physicalDisks allPhysicalDisks Description The tray and the slot where the physical disk resides. Tray ID values are 0 to 99. Slot ID values are 0 to 31. Enclose the tray ID values and the slot ID values in square brackets ([ ]). Selects all the physical disks. Set Host This command assigns a host to a host group or moves a host to a different host group. You can also create a new host group and assign the host to the new host group with this command. The actions performed by this command depend on whether the host has individual mappings or does not have individual mappings. Syntax set host [hostName] hostGroup=("hostGroupName" | none | defaultGroup) userLabel="newHostName" hostType=(hostTypeIndexLabel | hostTypeIndexNumber) Parameters Parameter host hostGroup Description The name of the host that you want to assign to a host group. Enclose the host name in square brackets ([ ]). If the host name has special characters, you must also enclose the host name in double quotation marks (" "). The host group to which you want to assign the host. (The following table defines how the command runs if the host does or does not have individual virtual disk-to-LUN mappings.) Enclose the host group name in double quotation marks (" "). The defaultGroup is the host group that contains the host to which the virtual disk is mapped. Script Commands 191