Dell PowerVault MD3200 CLI Guide - Page 40

Table 2-5. Range of Values for Recurring Syntax Elements (continued) Recurring Syntax maxFramePayload tcpListeningPort (tcp-port-id) Syntax Values 1500 NOTE: The maxFramePayload parameter is shared between IPv4 and IPv6. The payload portion of a standard Ethernet frame is set at 1500 bytes, and a jumbo Ethernet frame is set at 9000 bytes. When using jumbo frames, make sure that all of the devices contained in the network path can handle the larger frame size. 3260, or 49,152 to 65,536 The default value is 3260. Usage Guidelines The following list provides guidelines for writing script commands on the command line: • You must end all commands with a semicolon (;). • You can enter more than one command on a line, but you must separate each command with a semicolon (;). • You must separate each base command and its associated primary and secondary parameters with a space. • The script engine is case sensitive. • You can add comments to your scripts to make it easier for you and future users to understand the purpose of the script commands. (For information on how to add comments, see "Adding Comments to a Script File" on page 41). NOTE: While the CLI and script commands are not case sensitive, user labels (such as for virtual disk, hosts, or host ports) are case sensitive. If you try to map to an object identified by a user label, you must enter the user label exactly as it is defined, or the CLI and script commands fails. 40 About the Script Commands