Dell PowerVault MD3200 CLI Guide - Page 95
Synchronizing RAID Controller Module Clocks, Locating Physical Disks
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
To determine which virtual disks have reservations, run the following command: show (allVirtualDisks | virtualDisk [virtualDiskName] | virtualDisks [virtualDiskName1 ... virtualDiskNamen]) reservations To clear persistent virtual disk reservations, run the following command: clear (allVirtualDisks | virtualDisk[virtualDiskName] | virtualDisks [virtualDiskName1" ... "virtualDiskNamen]) reservations Synchronizing RAID Controller Module Clocks To synchronize the clocks on both RAID controller modules in a storage array with the host clock, run the following command: set storageArray time Locating Physical Disks At times, you might need to locate a specific physical disk. In very large storage array configurations, this can sometimes be awkward. If you need to locate a specific physical disk, turn on the indicator LED on the front of the physical disk. To turn on the indicator LED on a physical disk, run the following command: start physicalDisk [enclosureID,slotID] blink To turn off the indicator LED after locating the physical disk, run the following command: stop physicalDisk blink Maintaining a Storage Array 95