Dell PowerVault MD3200i CLI Guide - Page 123
Create Disk Group, Parameters, Syntax
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Parameters Parameter allVirtualDisks virtualDisk or virtualDisks Description Clears unreadable sector information from all of the virtual disks in the storage array. The name of the specific virtual disk for which you want to clear unreadable sector information. You can enter more than one virtual disk name. Enclose the virtual disk name in square brackets ([ ]). If the virtual disk name has special characters, you also must enclose the virtual disk name in double quotation marks (" "). NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation. Create Disk Group This command creates either a free-capacity disk group or a disk group with one virtual disk when you enter a set of assigned physical disks. Syntax create diskGroup physicalDisks=(enclosureID1,slotID1 enclosureID2,slotID2... enclosureIDn,slotIDn) raidLevel=(0 | 1 | 5 | 6) userLabel="diskGroupName" [driveMediaType=(HDD | SSD | unknown | allMedia) capacity=virtualDiskCapacity owner=(0 | 1) cacheReadPrefetch=(TRUE | FALSE) segmentSize=segmentSizeValue usageHint=(fileSystem | dataBase | multiMedia) enclosureLossProtect=(TRUE | FALSE) securityType=(none | capable | enabled)] Script Commands 123