Dell PowerVault MD3200i CLI Guide - Page 204
Set Session, portSpeed, iscsiHostOptions
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
The portSpeed option is expressed as megabits per second (Mb/s). The following values are the default values for the iscsiHostOptions: • The IPv6HopLimit option is 64. • The IPv6NdReachableTime option is 30000 milliseconds. • The IPv6NdRetransmitTime option is 1000 milliseconds. • The IPv6NdTimeOut option is 30000 milliseconds. • The tcpListeningPort parameter is 3260. Values for the portSpeed option of the iscsiHostPort parameter are in megabits per second (Mb/s). Set Session This command defines how you want the current script engine session to run. Syntax set session errorAction=(stop | continue) password="storageArrayPassword" performanceMonitorInterval=intervalValue performanceMonitorIterations=iterationValue Parameters Parameter errorAction password Description How the session responds if an error is encountered during processing. You can choose to stop the session if an error is encountered, or you can continue the session after encountering an error. The default value is stop. (This parameter defines the action for execution errors, not syntax errors. Some error conditions might override the continue value.) The password for the storage array. Enclose the password in double quotation marks (" "). 204 Script Commands