Dell PowerVault MD3200i CLI Guide - Page 168
Recover RAID Virtual Disk, cacheReadPrefetch=TRUE | FALSE]
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Recover RAID Virtual Disk This command creates a RAID virtual disk with the given properties without initializing any of the user data areas on the disks. Parameter values are derived from the Recovery Profile data file for the storage array. NOTE: This command can be run only from the command line. The storage management GUI cannot be used to recover a virtual disk. Syntax recover virtualDisk (physicalDisk= (enclosureID,slotID) | physicalDisks=(enclosureID1,slotID1 enclosureID2, slotID2 ... enclosureIDn, slotIDn) | diskGroup=diskGroupName)) [newDiskGroup=diskGroupName] userLabel=("virtualDiskName" virtualDiskWWID="virtualDiskWWID") capacity=virtualDiskCapacity offset=offsetValue raidLevel=(0 | 1 | 5 | 6) segmentSize=segmentSizeValue dssPreallocate=(TRUE | FALSE) SSID=virtualDiskCapacity [owner=(0 | 1) cacheReadPrefetch=(TRUE | FALSE)] Parameters Parameter physicalDisk or physicalDisks Description Specifies the physical disks to assign to the virtual disk that you want to create. Specify the tray ID and slot ID for each physical disk that you assign to the virtual disk. Tray ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the tray ID value and the slot ID value. 168 Script Commands