Dell PowerVault MD3260 CLI Guide - Page 134

Parameter virtualDisk or virtualDisks removeDiskGroup schedule Description NOTE: Using the allVirtualDisks parameter deletes virtual disks until all are removed or until an error is encountered. If an error is encountered, this command does not attempt to delete the remaining virtual disks. Name of the virtual disk to delete. You can enter more than one virtual disk name. You must put brackets ([ ]) around the virtual disk name. If the virtual disk name has special characters, you must also put quotation marks (" ") around the virtual disk name. Deleting the last virtual disk in a disk group does not delete the disk group. You can have a standalone disk group (minus any virtual disks). To remove the standalone disk group, set this parameter to TRUE. To keep standalone disk groups intact, set this parameter to FALSE. Deletes only the schedule. Delete Virtual Disk On A Disk Pool This command deletes virtual disks on a disk pool. CAUTION: All of the data in the virtual disk is lost as soon as you run this command. Syntax delete (allVirtualDisks | virtualDisk [virtualDiskName] | virtualDisks [virtualDiskName1 ... virtualDiskNameN] [removeDiskGroup=(TRUE | FALSE) retainRepositoryMembers=(TRUE | FALSE)] Parameters Parameter Description allVirtualDisks This parameter deletes all of the virtual disks on a disk pool. virtualDisk or virtualDisks The name of the virtual disk that you want to delete. You can enter more than one virtual disk name. Enclose the virtual disk name in square brackets ([ ]). If the virtual disk name has special characters, you also must enclose the virtual disk name in double quotation marks (" "). removeDiskGroup Deleting the last virtual disk in a disk group does not delete the disk group. You can have a standalone disk group (minus any virtual disks). To remove the standalone disk group, set this parameter to TRUE. To keep 134