Dell PowerVault MD3260 CLI Guide - Page 205

Show Virtual Disk Action Progress For a long-running operation that is currently running on a virtual disk, this command returns information about the virtual disk action and amount of the long-running operation completed. The completed amount of the long-running operation is shown as a percentage (for example, 25 means that 25 percent of the long-running operation is completed). Syntax show virtualDisk ["virtualDiskName"] actionProgress Parameters Parameter virtualDisk Description Name of the virtual disk running the long‑running operation. You must put quotation marks (" ") and brackets ([ ]) around the virtual disk name. The virtual disk name and quotation marks must be inside the brackets. Show Virtual Disk Copy This command returns information about virtual disk copy operations. The following information is returned: • Copy status • Start timestamp • Completion timestamp • Copy priority • Source virtual disk WWID or target virtual disk WWID • Read-only attribute setting of the target virtual disk You can retrieve information about a specific virtual disk copy pair or all virtual disk copy pairs in the storage array. Syntax show virtualDiskCopy (allVirtualDisks | source ["sourceName"] | target ["targetName"]) Parameters Parameter allVirtualDisks source target Description Returns information about virtual disk copy operations for all virtual disk copy pairs. Name of the source virtual disk about which to retrieve information. You must put quotation marks (" ") and brackets ([ ]) around the source virtual disk name. The source virtual disk name and quotation marks must be inside the brackets. Name of the target virtual disk about which to retrieve information. You must put quotation marks (" ") and brackets ([ ]) around the target virtual disk name. The target virtual disk name and quotation marks must be inside the brackets. 205