Dell PowerVault MD3260 CLI Guide - Page 157
Revive Disk Pool, Revive Physical Disk, Save Enclosure Log Data, Slot ID values
![]() |
View all Dell PowerVault MD3260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Parameter diskGroup Description Number of the disk group to be set to the optimal state. You must put brackets ([ ]) around the disk group number. Revive Disk Pool This command forces a disk pool and its associated physical disks to the Optimal state. CAUTION: Correct use of this command depends on the data configuration on all of the physical disks in the disk pool. Do not try to revive a disk pool unless you are supervised by your Technical Support representative. Syntax revive diskPool [diskPoolName] Parameter Parameter Description diskPool The alphanumeric identifier (including - and _) of the disk pool that you want to revive. Enclose the diskPoolName in square brackets ([ ]). Revive Physical Disk This command forces the specified physical disk to the optimal state. CAUTION: Correct use of this command depends on the data configuration on all physical disks in the disk group. Never attempt to revive a physical disk unless supervised by a Technical Support representative. Syntax revive physicalDisk [enclosureID,slotID] Parameter Parameter Description physicalDisk Identifies the enclosure and slot where, the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and the slot ID value. Save Enclosure Log Data This command saves the enclosure log sense data to a file. Log sense data is maintained by the environmental cards for each enclosure. Not all of the environmental cards contain log sense data. Syntax save allEnclosures logFile="filename" Parameter 157
![](/manual_guide/products/dell-powervault-md3060e-cli-guide-d192876/157.png)