Dell Precision 3630 Tower Service Manual - Page 64
Power button module, Removing power button module
View all Dell Precision 3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Power button module Removing power button module 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Cover b. Front bezel c. IO panel 3. Open the PSU hinge. 4. Disconnect the power button module cable from the connector on the system board [1]. 5. Remove the button module cable from the routing guides next to the system board on the chassis [2,3]. 6. Remove the adhesive tape that secures the power button module to the chassis [1]. 7. Press the notches to release the power button module and pull the power button module to remove it from the system [2,3]. 64 Disassembly and reassembly
Power button module
Removing power button module
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Cover
b.
Front bezel
c.
IO panel
3.
Open the
PSU hinge
.
4.
Disconnect the power button module cable from the connector on the system board [1].
5.
Remove the button module cable from the routing guides next to the system board on the chassis [2,3].
6.
Remove the adhesive tape that secures the power button module to the chassis [1].
7.
Press the notches to release the power button module and pull the power button module to remove it from the system [2,3].
64
Disassembly and reassembly