Dell Precision 3630 Tower Service Manual - Page 69
Blower and heat sink assembly, Removing heatsink assembly — 95 W CPU
View all Dell Precision 3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4. Close the PSU hinge. 5. Install the cover. 6. Follow the procedure in After working inside your computer. Blower and heat sink assembly Removing heatsink assembly - 95 W CPU These steps applies to system configurations shipped with 95 W CPU. 1. Follow the procedure in Before working inside your computer. 2. Remove the cover. 3. Open the PSU hinge. 4. Remove the three #6-32x1/4'' screws that secure the blower to the heat-sink assembly [1]. 5. Flip over the blower and place it to a side [2]. Disassembly and reassembly 69
4.
Close the
PSU hinge
.
5.
Install the
cover
.
6.
Follow the procedure in
After working inside your computer
.
Blower and heat sink assembly
Removing heatsink assembly — 95 W CPU
These steps applies to system configurations shipped with 95 W CPU.
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
cover
.
3.
Open the
PSU hinge
.
4.
Remove the three #6-32x1/4'' screws that secure the blower to the heat-sink assembly [1].
5.
Flip over the blower and place it to a side [2].
Disassembly and reassembly
69