Dell Precision 3630 Tower Service Manual - Page 82
Optional IO card, Removing optional IO card, Installing the optional IO card
View all Dell Precision 3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Optional IO card Removing optional IO card NOTE: You may see one of these cards-HDMI/DisplayPort/VGA/Type-C based on the additional component you may have ordered with the system. 1. Follow the procedure in Before working inside your computer. 2. Remove the cover. 3. Open the PSU hinge. 4. To remove the optional IO card: a. Disconnect the IO card cable from the connector on the system board [1]. b. Remove the two M3X3 screws that secure the IO card to the system [2]. c. Remove the IO card from the system [3]. Installing the optional IO card 1. To remove the metal bracket as shown below, insert a flathead screwdriver in the hole of the bracket [1], push the bracket to release the bracket [2], and then lift the bracket out from the system. 82 Disassembly and reassembly