Dell Precision 3630 Tower Service Manual - Page 71
Installing the heatsink assembly — 95 W CPU
![]() |
View all Dell Precision 3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Installing the heatsink assembly - 95 W CPU These steps applies to system configurations shipped with 95 W CPU. 1. Route the blower cable through the heat sink assembly [1] and connect the blower cable to the connector on the system board [2]. 2. Place the heat-sink assembly over the processor. 3. Align the captive screws on the heat-sink assembly with the screw holes on the system board. Disassembly and reassembly 71
![](/manual_guide/products/dell-precision-3630-tower-service-manual-d51f4c4/71.png)
Installing the heatsink assembly — 95 W CPU
These steps applies to system configurations shipped with 95 W CPU.
1.
Route the blower cable through the heat sink assembly [1] and connect the blower cable to the connector on the system
board [2].
2.
Place the heat-sink assembly over the processor.
3.
Align the captive screws on the heat-sink assembly with the screw holes on the system board.
Disassembly and reassembly
71