Dell Precision 3630 Tower Service Manual - Page 67
Heatsink assembly, Removing heatsink assembly - 65 W or 80 W CPU, After Working Inside Your Computer
View all Dell Precision 3630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5. Install the: a. IO panel b. Optical drive c. Front bezel d. Cover 6. Close the PSU hinge. 7. Follow the procedure in After Working Inside Your Computer. Heatsink assembly Removing heatsink assembly - 65 W or 80 W CPU These steps applies to system configurations shipped with 65 W or 80 W CPU. 1. Follow the procedure in Before working inside your computer. 2. Remove the Cover. 3. Open the PSU hinge. 4. To remove the heat sink assembly: a. Disconnect the heat sink assembly cable from the connector on the system board [1]. b. Loosen the 4 captive screws that secure the heat sink assembly [2] and lift it from the system [3]. NOTE: Loosen the screws in a sequential order (1,2,3,4) as mentioned on the system board. Disassembly and reassembly 67