Dell S3100 Command Line Reference Guide for the Series 9.112.0P2 - Page 1032

ip msdp sa-filter Permit or deny MSDP source active (SA) messages based on multicast source and/or group from the specified peer. Syntax ip msdp sa-filter {in | out} peer-address list [access-list name] Remove this configuration using the no ip msdp sa-filter {in | out} peer address list [access-list name] command. Parameters in out peer-address access-list name Enter the keyword in to enable incoming SA filtering. Enter the keyword out to enable outgoing SA filtering. Enter the peer address of the MSDP peer in a dotted decimal format (A.B.C.D.). Enter the name of an extended ACL that contains permitted SAs. If you do not use this option, all local entries are blocked. Defaults Command Modes Command History Not configured. CONFIGURATION This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.5(0.1) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.7.1.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. 1032 Multicast Source Discovery Protocol (MSDP)