Dell S3100 Command Line Reference Guide for the Series 9.112.0P2 - Page 685

Example Version 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 8.1.1.0 7.6.1.0 7.5.1.0 6.1.1.0 Description Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Dell(conf)# interface range gigabitethernet 1/1 - 1/2 Dell(conf-if-range-gi-1/1-2)# show config ! interface GigabitEthernet 1/1 no ip address switchport no shutdown ! interface GigabitEthernet 1/2 no ip address switchport no shutdown Dell(conf-if-range-gi-1/1-1/2)# show hardware Display the hardware counters on a specified interface or on a specified stack unit. Syntax Parameters show hardware {counters interface interface-type slot/port | stack-unit stackunit-number unit unit-number counters} counters interface stack-unit unit Enter the keyword counters to display the counters on a specified interface. Enter the keyword interface followed by the interface information and the slot/port number. Enter the keyword stack-unit followed by a stack unit-number to display the counters on a specified stack unit. Enter the keyword unit followed by a unit-number. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.11(0.0) Description Introduced on the S3048-ON. Interfaces 685