Dell S4048-ON EMC Networking with Isilon Front-End Deployment and Best Practic - Page 50
Configuration of S4048-ON OS9 Leaf Switches, downstream port-channel5
View all Dell S4048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
S4048-ON Leaf 1 interface port-channel49 description "Spine 1" no shutdown switchport mode trunk switchport trunk allowed vlan 100 mtu 9216 vlt-port-channel 49 interface ethernet1/1/49 description "Spine 1" no shutdown no switchport channel-group 49 mode active mtu 9216 interface ethernet1/1/50 description "Spine 2" no shutdown no switchport channel-group 49 mode active mtu 9216 S4048-ON Leaf 2 interface port-channel49 description "Spine 1" no shutdown switchport mode trunk switchport trunk allowed vlan 100 mtu 9216 vlt-port-channel 49 interface ethernet1/1/49 description "Spine 1" no shutdown no switchport channel-group 49 mode active mtu 9216 interface ethernet1/1/50 description "Spine 2" no shutdown no switchport channel-group 49 mode active mtu 9216 Uplink Failure Detection (UFD) is configured next. UFD is a feature that shuts down specified downstream interfaces when all specified uplinks become disabled. S4048-ON Leaf 1 uplink-state-group 1 enable downstream port-channel1 downstream port-channel3 downstream port-channel5 downstream port-channel101 downstream port-channel102 upstream port-channel49 end write memory S4048-ON Leaf 2 uplink-state-group 1 enable downstream port-channel1 downstream port-channel3 downstream port-channel5 downstream port-channel101 downstream port-channel102 upstream port-channel49 end write memory Finally, exit configuration mode and save the configuration. 7.3 Configuration of S4048-ON OS9 Leaf Switches Configurations in this section cover the leaf switches 3 and 4 running OS9 as seen in Figure 24. 50 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0