Dell S5248F-ON EMC PowerSwitch S5200-ON Series BMC User Guide March 2021 - Page 23
Data1: Protocol, Bit 7:2-Reserved
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Table 3. Firewall parameters (continued) Parameter # Remove drop all Ipv4 or IPv6 with 20 timeout rule Add IPv6 address with timeout rule 21 Parameter data ● 7-minute ● Date 8:13-Stop time ● [8:9]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 10-month ● 11-date ● 12-hour ● 13-minute Add iptables rules to block IPv4 and IPv6 traffic to the BMC. The state selector is not used. ● Data1: Protocol ● Bit 7:2-Reserved ● Bit 1-IPv6 ● Bit 0-IPv4 ● Date 2:7-Start time ● [2:3]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 4-month ● 5-date ● 6-hour ● 7-minute ● Date 8:13-Stop time ● [8:9]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 10-month ● 11-date ● 12-hour ● 13-minute Data 1:16-IPv6 address ● MS-byte first. The IPv6 address type blocked or unblocked based on the state. ● Date 7:22-Start time ● [17:18]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 19-month ● 20-date ● 21-hour ● 22-minute ● Date 23-28-stop time ● [23:24]-Year ● LS-byte first if little endian system. Two-byte data required to form year. ● 25-month ● 26-date ● 27-hour ● 28-minute Configuration methods 23