Dell S5248F-ON EMC PowerSwitch S5200-ON Series BMC User Guide March 2021 - Page 27
Add the IPv6 port number rule, Remove the IPv6 address range rule
![]() |
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Table 3. Firewall parameters (continued) Parameter # Add the IPv6 address rule 29 Add the IPv6 address range rule 30 Remove the IPv6 address rule 31 Remove the IPv6 address range rule 32 Add the IPv6 port number rule 33 Add the IPv6 port number range rule 34 Remove the IPv6 port number rule 35 Parameter data ● LS-byte first if little endian system. Two-byte data required to form year. ● 14-month ● 15-date ● 16-hour ● 17-minute Data 1:16-IPv6 address. ● MS-byte first. This is an IPv6 address that is blocked or unblocked based on state. Data 1:16-IPv6 address range ● [1:16]-Starting IP address from which IPs are blocked or unblocked based on the state. ● [17.32]-Ending IP address until IPs are blocked or unblocked based on the state. Data 1:16-IPv6 address ● MS-byte first. This is an IPv6 address that is blocked or unblocked based on state. Data 1:16-IPv6 address range ● [1:16]-Starting IP address from which IPs are blocked or unblocked based on the state. ● [17.32]-Ending IP address until IPs are blocked or unblocked based on the state. Data 1-Protocol TCP and UDP ● 0 = TCP ● 1 = UDP ● 2 = both TCP and UDP ● Data 2:3-port number ● [2:3]-Port number from the ports blocked or unblocked based on the state. Data 1-Protocol TCP and UDP ● 0 = TCP ● 1 = UDP ● 2 = both TCP and UDP ● Data 2:5-port number ● [2:3]-Port number from the ports blocked or unblocked based on the state. ● [4:5]-Port number till the ports are blocked or u nblocked based on the state. Data 1-Protocol TCP and UDP ● 0 = TCP ● 1 = UDP ● 2 = both TCP and UDP ● Data 2:3-port number Configuration methods 27
![](/manual_guide/products/dell-s5248fon-emc-powerswitch-s5200on-series-bmc-user-guide-2021-226971c/27.png)