Dell S5248F-ON EMC PowerSwitch S5200-ON Series BMC User Guide March 2021 - Page 30
Default settings, Set backup configuration flag, Table 4. Default settings after a switch restore
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
● Command-0x66 ● Response byte 1-Completion code Default settings The following tables list the default settings after a switch restore. Table 4. Default settings after a switch restore Name BMC OOB Setting Enabled for non-TAA and disabled for TAA BMC OOB - after restore to default Disabled BMC WEB Enabled for non-TAA and disabled for TAA BMC WEB - after restore to default Disabled BMC console Enabled for non-TAA and disabled for TAA BMC console - after restore to default Enabled for non-TAA and disabled for TAA BMC supports unique password Yes BMC OOB username/password admin/admin BMC OOB username/password - after restore to default BMC WEB admin/admin (but only valid for the IPMI commands for mc info and change administrator password) admin/admin BMC WEB - after restore to default admin/admin (but WEB GUI displays a message to confirm change of the administrator password) BMC console login username/password sysadmin/superuser BMC console login username/password - after restore to default sysadmin/superuser Set backup configuration flag To set the backup flags for the manage BMC confirguration command, use the set backup configuration flag command. ● NetFN-0x32 ● Command-0xF3 ● Request data byte 1:2-Byte 1 is the value specifies to back up a configuration feature or not. ○ [7]-Reserved ○ [6]-1b: Backup SNMP. 0b: Do not backup the simple network management protocol (SNMP) ○ [5]-1b: Backup SYSLOC. 0b: Do not backup SYSLOG ○ [4]-1b: Backup KVM. 0b: Do not backup keyboard, video, and mouse (KVM) ○ [3]-1b: Backup NTP. 0b: Do not backup network time protocol (NTP) ○ [2]-1b: Backup IPMI. 0b: Do not backup IPMI ○ [1]-1b: Backup NETWORK And SERVICES. 0b: Do not backup NETWORK And SERVICES ○ [0]-1b: Backup AUTHENTICATION. 0b: Do not backup AUTHENTICATION NOTE: Reserved bits may be updated further based on the requirement. ● Response data byte 1-Completion code ○ 0x83-Authentication feature is not enabled ○ 0x84-NTP feature is not enabled ○ 0x85-KVM feature is not enabled ○ 0x86-SNMP feature is not enabled 30 Configuration methods