Dell S5248F-ON EMC Networking OS10EE FCoE Deployment with FSB - Page 25
S4148U-F-Port-1, S4148U-F-Port-2
![]() |
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
6.2.5 Configure QoS Quality of Service (QoS) configuration is a 3-step process: 1. Create class maps to classify traffic. 2. Create QoS and policy maps for the classified traffic. 3. Apply the QoS and policy maps. FCoE traffic is assigned dot1p priority value 3 by default. In the following tables, dot1p priority value 3 is mapped to QoS group 3. The remaining dot1p priority values, 0-2 and 4-7, are mapped to QoS group 0. QoS group 3 is mapped to queue 3, and QoS group 0 is mapped to queue 0. In this example, bandwidth is allocated 50% to queue 3 for FCoE traffic and 50% to queue 0 for all other traffic using the bandwidth percent command. (Bandwidth allocations should total 100% and may be adjusted accordingly to optimize traffic). Finally, exit configuration mode and save the configuration with the end and write memory commands. S4148U-F-Port-1 dcbx enable class-map type network-qos class_Dot1p_3 match qos-group 3 class-map type queuing map_ETSQueue_0 match queue 0 class-map type queuing map_ETSQueue_3 match queue 3 trust dot1p-map map_Dot1pToGroups qos-group 0 dot1p 0-2,4-7 qos-group 3 dot1p 3 qos-map traffic-class map_GroupsToQueues queue 0 qos-group 0 queue 3 qos-group 3 policy-map type network-qos policy_Input_PFC class class_Dot1p_3 pause pfc-cos 3 policy-map type queuing policy_Output_BandwidthPercent class map_ETSQueue_0 bandwidth percent 50 class map_ETSQueue_3 bandwidth percent 50 interface ethernet 1/1/41 flowcontrol receive off flowcontrol transmit off priority-flow-control mode on ets mode on service-policy input type network-qos policy_Input_PFC S4148U-F-Port-2 dcbx enable class-map type network-qos class_Dot1p_3 match qos-group 3 class-map type queuing map_ETSQueue_0 match queue 0 class-map type queuing map_ETSQueue_3 match queue 3 trust dot1p-map map_Dot1pToGroups qos-group 0 dot1p 0-2,4-7 qos-group 3 dot1p 3 qos-map traffic-class map_GroupsToQueues queue 0 qos-group 0 queue 3 qos-group 3 policy-map type network-qos policy_Input_PFC class class_Dot1p_3 pause pfc-cos 3 policy-map type queuing policy_Output_BandwidthPercent class map_ETSQueue_0 bandwidth percent 50 class map_ETSQueue_3 bandwidth percent 50 interface ethernet 1/1/41 flowcontrol receive off flowcontrol transmit off priority-flow-control mode on ets mode on service-policy input type network-qos policy_Input_PFC 25 Dell EMC Networking OS10EE FCoE Deployment with FSB
![](/manual_guide/products/dell-powerswitch-s4148uon-emc-networking-os10ee-fcoe-deployment-fsb-592468b/25.png)