Dell SE2717H Monitor Users Guide - Page 45
Troubleshooting, Self-Test, follow
View all Dell SE2717H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor. This way, the computer doesn't have to be involved. 3. Turn on the monitor. If the monitor is working correctly, it detects that there is no signal and one of the following message appears. While in self-test mode, the power LED remains white. Dell SE2717H No HDMI Cable The display will go into Power Save Mode in 5 minutes. www. dell.com/support/monitors Dell SE2717H No VGA Cable The display will go into Power Save Mode in 5 minutes. www.d ell.com/support/monitors NOTE: This box also appears during normal system operation, if the video cable is disconnected or damaged. 4. Turn Off your monitor and reconnect the video cable; then turn on your computer and the monitor. If your monitor remains dark after you reconnect the cables, check your video controller and computer. Troubleshooting │ 45