Dell System 200 Owner's Manual - Page 129
Remove the computer cover see Removing the Computer Cover
View all Dell System 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Removing a Hard Drive 1 Follow the procedures in "Before You Begin" on page 101. 2 Remove the computer cover (see "Removing the Computer Cover" on page 103). 3 Disconnect the power and data cables from the drive. 4 Disconnect the data cable from the system board. 1 5 2 3 4 1 hard drive 4 system board connector 2 power cable 5 screws (4) 3 serial ATA data cable 5 Remove the four screws securing the hard drive. NOTICE: Ensure that you do not scratch the screw holes with the screw driver, as the hard disk circuit board assembly is exposed. 6 Slide the drive out and away from the front of the computer. Removing and Installing Parts 129
Removing and Installing Parts
129
Removing a Hard Drive
1
Follow the procedures in "Before You Begin" on page101.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3
Disconnect the power and data cables from the drive.
4
Disconnect the data cable from the system board.
5
Remove the four screws securing the hard drive.
NOTICE:
Ensure that you do not scratch the screw holes with the screw driver, as
the hard disk circuit board assembly is exposed.
6
Slide the drive out and away from the front of the computer.
1
hard drive
2
power cable
3
serial ATA data cable
4
system board connector
5
screws (4)
2
4
3
1
5