Dell System 200 Owner's Manual - Page 157
Installing the Processor Fan/Heat Sink Assembly
View all Dell System 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
NOTE: The processor fan/heat sink assembly in your computer may vary from the one shown in the illustration. Installing the Processor Fan/Heat Sink Assembly NOTICE: When reinstalling the fan, ensure that you do not pinch the wires that run between the system board and the fan. 1 Align the captive screws on the processor fan/heat sink assembly to the four metal screwhole projections on the system board. 1 2 1 captive screws (4) 2 processor fan/heat sink assembly NOTE: The processor fan/heat sink assembly in your computer may vary from the one shown in the illustration above. 2 Tighten the four captive screws. NOTE: Ensure that the processor fan/heat sink assembly is correctly seated and secure. 3 Connect the processor fan/heat sink assembly cable to the system board (see "System Board Components" on page 106). Removing and Installing Parts 157