Dell TrueMobile 2300 Dell TrueMobile 2300 Wireless Broadband Router User's Gui - Page 159
Your ISP requires you to input Host Computer Name or Domain Name
![]() |
View all Dell TrueMobile 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
WPA Group Rekey Interval is used to specify the frequency of encryption key rotations. The lower the number, the faster your encryption key will rotate, however, setting this number too low may cause your wireless network to slow down. WPA Encryption WPA Encryption has 2 choices: TKIP (Temporal Key Integrity Protocol) - it is the most commonly used encryption method and AES (Advanced Encryption Standard) - it can be used if your wireless clients do not support TKIP. Click NEXT to continue. Back to Top Internet Connection Settings It is only necessary to specify these settings when the Wireless Broadband Router is used as a router. To determine the set of information of ISP settings you need, refer to the ISP Settings Checklist. NOTE: The Setup Wizard enters the required Cable/xDSL ISP settings into the router after you select "Installation" and "Setup First Computer" and complete the installation successfully. Only if the Setup Wizard is not successful in establishing an Internet connection should the Cable/xDSL ISP settings need to be changed with the options provided here. NOTE: If the device is put in AP mode, the Internet Connection Settings will not be available. Your ISP requires you to input Host Computer Name or Domain Name If your ISP requires that you input a host computer name or domain name, check the box titled Your ISP requires you to input Host Computer Name or Domain Name. This box should only be checked if your cablebased ISP has provided you with a host or computer name and/or a domain name. Enter the appropriate values in the fields provided. Click the NEXT button to continue. NOTE: Host computer names and domain names are only used by cable-modem ISPs. Your ISP requires you to input WAN Ethernet Mac If your ISP requires that you input a WAN Ethernet MAC address, check the box titled Your ISP requires you to input WAN Ethernet MAC. In the field provided, enter the public WAN (cable/xDSL) MAC address assigned to your Wireless Broadband Router. You can find the WAN MAC address on the back panel of the Wireless Broadband Router or on the Device Information page on the web-based configuration tool. Click the NEXT button to continue. Connection Type Select the Connection Type from the list. There are four options available. Cable Modem DSL (Static) DSL (PPPoE) PPTP Cable Modem Settings
![](/manual_guide/products/dell-truemobile-2300-dell-truemobile-2300-wireless-broadband-router-users-guide-697466f/159.png)