Dell TrueMobile 2300 Dell TrueMobile 2300 Wireless Broadband Router User's Gui - Page 164
Indicator, Description, LAN or WAN interface INTF
View all Dell TrueMobile 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Back to Top Display Routing Table Indicator Type Destination LAN IP Address Subnet Mask Gateway IP Address Hop Count Description The type of routing. This can be either: LAN or WAN interface (INTF) Static routing Either an entire network or a specific IP address. An IP address ending in .0 refers to a network. Must follow the subnet mask rules To communicate with an IP address matching the destination IP Address, the Wireless Broadband Router sends all traffic through the gateway IP address listed here. The number of routers the packet has passed through to its destination. Hop count is used to measure the distance between a source and a destination. If there are 3 routers between the source and the destination nodes, the hop count for the packet will be 3 when it arrives at its destination node. The figure below shows three network routes that your router currently possesses. 192.168.2.0 is the destination network connected to one of your router's interface port (LAN or WAN) and the IP address and Subnet Mask for this interface is 192.168.2.1 and 255.255.255.0, respectively. The number of routers (Hop Count) the packet passed through is 1. Also in the same example, the destination with 0.0.0.0 network and 0.0.0.0 Subnet Mask is the default route for your router, where every packet that left unmapped to any other route will be mapped to this route. The outgoing default gateway IP address is 192.168.1.254.