Dell Vostro 1000 Service Manual - Page 32

Modem

Get Dell Vostro 1000 PDF manuals and user guides View all Dell Vostro 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Back to Contents Page Modem Dell™ Latitude™ 131L/ Dell Vostro™ 1000 Service Manual Removing the Modem Replacing the Modem CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before you begin working inside the computer. Removing the Modem 1. Follow the instructions in Before You Begin. 2. Turn the computer upside-down, loosen the two captive screws on the memory module/modem cover, and remove the cover from the computer. 1 captive screws (2) 2 memory module/modem cover 3. Remove the M2 x 3-mm screw that attaches the modem to the system board. 4. Pull up on the pull-tab to disconnect the modem from the modem connector on the system board. 1 modem screw 4 modem 2 modem pull-tab 5 modem cable 3 modem connector on system board

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Back to Contents Page
Modem
Dell™ Latitude™ 131L/
Dell Vostro™ 1000 Service Manual
Removing the Modem
Replacing the Modem
Removing the Modem
1.
Follow the instructions in
Before You Begin
.
2.
Turn the computer upside-down, loosen the two captive screws on the memory module/modem cover, and remove the cover from the computer.
3.
Remove the M2 x 3-mm screw that attaches the modem to the system board.
4.
Pull up on the pull-tab to disconnect the modem from the modem connector on the system board.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, you must remove the main battery (see
Before Working Inside Your Computer
) before you
begin working inside the computer.
1
captive screws (2)
2
memory module/modem cover
1
modem screw
2
modem pull-tab
3
modem connector on system board
4
modem
5
modem cable