Dell Vostro 220 Service Manual - Page 63
Configuring Your Computer After Removing or Installing a PCI or PCI Express Card - audio driver
UPC - 884116011958
View all Dell Vostro 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Configuring Your Computer After Removing or Installing a PCI or PCI Express Card NOTE: For information on installing drivers and software for your card, see the documentation that shipped with the card. Type of Card Sound Card Network Card Installed Removed 1 Enter the system setup program (see "System Setup Program" on page 129 for instructions). 2 Go to Integrated Peripherals, select Onboard Audio Controller, and then change the setting to Disabled. 3 Connect the external audio devices to the sound card's connectors. 1 Enter the system setup program (see "System Setup Program" on page 129 for instructions). 2 Go to Integrated Peripherals, select Onboard Audio Controller, and then change the setting to Enabled. 3 Connect the external audio devices to the computer's back panel connectors. 1 Enter the system setup program (see "System Setup Program" on page 129 for instructions). 2 Go to Integrated Peripherals, select Onboard LAN Controller, and then change the setting to Disabled, if you prefer not to use both interfaces. 3 Connect the network cable to the network card's connector. 1 Enter the system setup program (see "System Setup Program" on page 129 for instructions). 2 Go to Integrated Peripherals, select Onboard LAN Controller, and then change the setting to Enabled. 3 Connect the network cable to the network connector on the system board. PCI and PCI Express Cards 63