Dell Vostro 220 Service Manual - Page 97
Replacing the Chassis Fan
UPC - 884116011958
View all Dell Vostro 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Replacing the Chassis Fan 1 For the Vostro 220s: a Lower the fan into the chassis such that the screw hole in the fan is offset and slightly forward of the screw hole in the fan mount on the chassis. b Press the fan into the side of the chassis, and then slide it toward the back of the computer until it sets against the stops. c Proceed to step 3. 2 While holding the chassis fan in place, align the screw hole(s) and install the screw(s) that secure the fan to the chassis. 3 Attach the fan cable to the system board (see "System Board Components" on page 40). 4 Follow the procedure in "After Working on Your Computer" on page 45. Fan 97
Fan
97
Replacing the Chassis Fan
1
For the Vostro 220s:
a
Lower the fan into the chassis such that the screw hole in the fan is
offset and slightly forward of the screw hole in the fan mount on the
chassis.
b
Press the fan into the side of the chassis, and then slide it toward the
back of the computer until it sets against the stops.
c
Proceed to step 3.
2
While holding the chassis fan in place, align the screw hole(s) and install
the screw(s) that secure the fan to the chassis.
3
Attach the fan cable to the system board (see "System Board Components"
on page 40).
4
Follow the procedure in "After Working on Your Computer" on page45.