Dell Vostro 24 5450 Dell Vostro 245450 Owners Manual - Page 12

Installing the Memory, Removing the Heatsink, stand, back cover, After Working Inside Your Computer

Get Dell Vostro 24 5450 PDF manuals and user guides View all Dell Vostro 24 5450 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

a. stand b. back cover 3. Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory module from its connector. Installing the Memory NOTE: Please use DIMM 2 slot if there is only one memory module available. 1. Align the notch on the memory module with the tab on the system-board connector. 2. Press down on the memory module until the retention clip spring back to secure them in place. 3. Install: a. back cover b. stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Heatsink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. stand b. back cover 3. Remove the screws that secure the heatsink to the system board [1,2,3,4,5,6,7]. 4. Lift the heatsink from the system board. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
a.
stand
b.
back cover
3.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
Installing the Memory
NOTE:
Please use DIMM 2 slot if there is only one memory module available.
1.
Align the notch on the memory module with the tab on the system-board connector.
2.
Press down on the memory module until the retention clip spring back to secure them in place.
3.
Install:
a.
back cover
b.
stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
stand
b.
back cover
3.
Remove the screws that secure the heatsink to the system board [1,2,3,4,5,6,7].
4.
Lift the heatsink from the system board.
12