Dell Vostro 3591 With optical drive Service Manual - Page 21

WLAN card, Removing the WLAN card

Get Dell Vostro 3591 PDF manuals and user guides View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer WLAN card Removing the WLAN card Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. Steps 1. Remove the single (M2x3) screw that secures the WLAN card bracket to the system board [1]. 2. Slide and remove the WLAN card bracket that secures the WLAN cables [2]. 3. Disconnect the WLAN cables from the connectors on the WLAN card [3]. 4. Lift the WLAN card away from the connector [4]. Removing and installing components 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Next steps
1.
Connect the
battery
cable to the connector on the system board.
2.
Replace the
base cover
3.
Replace the
optical drive assembly
4.
Replace the
SD memory card
5.
Follow the procedure in
after working inside your computer
WLAN card
Removing the WLAN card
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
optical drive assembly
4.
Remove the
base cover
5.
Disconnect the
battery
cable from the connector on the system board.
Steps
1.
Remove the single (M2x3) screw that secures the WLAN card bracket to the system board [1].
2.
Slide and remove the WLAN card bracket that secures the WLAN cables [2].
3.
Disconnect the WLAN cables from the connectors on the WLAN card [3].
4.
Lift the WLAN card away from the connector [4].
Removing and installing components
21