Dell Vostro 3591 With optical drive Service Manual - Page 29
Hard drive, Removing the hard drive assembly
![]() |
View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Hard drive Removing the hard drive assembly Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Remove the battery Steps 1. Lift the latch and disconnect the hard drive cable from the system board [1]. 2. Remove the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2]. 3. Lift the hard drive assembly along with its cable off the palm rest and keyboard assembly [3]. Removing and installing components 29
![](/manual_guide/products/dell-vostro-3591-optical-drive-service-manual-6c20892/29.png)