Dell Vostro 3591 With optical drive Service Manual - Page 48
Display assembly, Removing the display assembly
View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Next steps 1. Replace the battery 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board 6. Remove the WLAN Steps 1. Open the latch and disconnect the optical drive cable and display cable from the system board [1, 2]. 2. Peel off the tape securing the wireless antenna from the system board [3]. 3. Unroute the display cable from the routing guides on the palmrest and keyboard assembly [4]. 48 Removing and installing components